How To Print On Roll Media - Oce Arizona 440 GT User Manual

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013

How to Print on Roll Media

[75] Roll Media Manager Keyboard
NOTE
There is always at least one media in the list that is called Default Media.
It cannot be deleted, but you can change its parameters if you want to use
it. If you choose to delete it, the parameters will go back to its original
values, but the item will still appear in the list.
7.
Select the Media Tension
8.
Select the Media Advance Correction Factor
NOTE
Leave it at 50 unless you see light or dark lines of banding in the printed
image (refer to the next section "How to Set the Media Advance
Correction Factor for more details).
9. When the displayed media values are correctly matched to the loaded
media, click Close to exit the Media Manager.
10.
Click on the Roll icon in the menu bar of the Job Control module to
activate the RMO print queue (the icon will change from yellow to green).
Result
Any print jobs that are in the queue, not on hold, and marked as roll jobs
will print. There is no explicit confirmation required to start a roll media
print job. Any roll media jobs in the print queue will start to print
immediately.
138 Chapter 7 - How to Operate the Roll Media Option