How To Prepare The Printer For Idle Periods - Oce Arizona 440 GT User Manual

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013

How to Prepare the Printer for Idle Periods

How to Prepare the Printer for Idle Periods
IMPORTANT
Do not turn off the printer during these idle times.
15 to 30 minutes
30 minutes to 24
hours
24 to 72 hours
3 to 14 days
Longer than 14 days
80 Chapter 5 - How to Operate Your Océ Arizona Printer
• Turn off lamps
• Turn off lamps
• Turn off ink heater
• Turn off lamps
• Perform printhead maintenance when the ink tem-
perature is at least 40° Centigrade (104° Fahrenheit)
• Swab print heads
• Turn off ink heater
• If the Automatic printer warm-up was set in Printer
Settings, turn it off
• Turn off lamps
• Perform printhead maintenance when the ink tem-
perature is at least 40° Centigrade (104° Fahrenheit)
• Swab printheads
• Turn off ink heater
• If the Automatic printer warm-up was set in Printer
Settings, turn it off
• Remove or rewind any media from the RMO
• Contact your local service representative if you
need to prepare the printer for longer term storage