Oce Arizona 440 GT User Manual page 91

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
How to Set Up a Print Job
NOTE
When the ink is at a low room temperature it may take up to 20 minutes
for it to warm up to operating temperature. The printer will not print until
the ink warms up. Also, when the printer is idle it will maintain the ink at
operating temperature for two hours.
Note: The image is printed towards the print origin instead of away from
it (i.e., the last data line to be printed is the line at the print origin). The
reason the image is printed in this direction is to allow the gantry to lead
the image in the print direction so it does not block the image when it
starts printing. Also it reduces the time it takes for the gantry to start the
print.
Chapter 5 - How to Operate Your Océ Arizona Printer 91