How To Print With Dual Origins; Chapter 6 - Oce Arizona 440 GT User Manual

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013

How to Print With Dual Origins

How to Print With Dual Origins
Introduction
Due to the larger table size and the vacuum zone arrangement of the Océ
Arizona 400 Series XT printer, it is possible to print in an alternating 2-up
arrangement using Origin A and Origin B for placement of the image.
Purpose
Dual Origin is used to print more than one copy of a specific print job on
media not larger than 1.25 x 2.5 meters (4 x 8 feet). This allows greater
productivity when printing multiple panels.
If the dimensions of your image are not greater than 1.25 x 2.5 meters (4 x
8 feet), the Dual Origin option is available from the Job parameters menu.
NOTE
It is also possible to select Dual Origin in the ONYX workflow application.
In Layout preview, the Preferred Origin field can be selected from a pull-
down menu with the choices Origin A, Origin B, or Dual Origin Mode. If
you don't select Dual Origin it can still be made active after the job is sent
to the print job queue, as explained below.
110 Chapter 6 - How to Operate the Océ Arizona 400 Series XT