Oce Arizona 440 GT User Manual page 50

User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
Print Job Control Module
unchecked state with a different appearance of the icon image to reflect
their state.
[35] Command Toolbar
Command Toolbar Icons Explained
Print job
Hold job
Cancel job
Delete job
Flatbed icon
50 Chapter 4 - How to Navigate the User Interface
This command can do the following actions depending
on context:
• Activates a selected inactive job by moving it to the ac-
tive list.
• Un-holds a held job.
• Un-holds an job that had an error currently.
The command can do following actions depending on
context:
• Puts an active job on hold.
• Waits until the printer finishes a currently printing
copy and puts the job on hold.
The command can do following actions depending on
context:
• Deactivates a selected active job by moving it to the in-
active list. Note that Special Prints will not move to the
inactive list.
• Cancels a currently printing job and moves it to the in-
active list. Note that the first click cancels the print, but
the carriage will continue to apply curing passes so
that the ink cures properly. A second click terminates
the print job immediately.
Deletes a job from the printer. However, you cannot de-
lete a job that is currently printing.
Process flatbed jobs toggle command - Allows printer to
process flatbed jobs. This must be selected to enable flat-
bed printing when the printer is booted or after re-setting
the printer due to an error.
4