Operator Interface Hardware - Oce Arizona 200 GT User Manual

Operator Interface Hardware

Operator Interface Hardware
Introduction
The Operator interacts with printer components to operate, maintain, and monitor the
state of the printer: This section identifies and explains the functions of the hardware.
[48] User Interface Hardware
#
(1) Main Power Switch
(2) Operator Control Station
(3) Vacuum Zone Control Handles
(4) Vacuum Table Foot Pedal
(5) Vacuum Bleed Valve
(6) Print Button
(7) Printer Status Light
(8) Emergency Stops
54 Chapter 4 - How to Navigate the User Interface
(9) Maintenance Station
(10) Coolant Reservoir Level
(11) Ink Filters
(12) Control Station Panel
(13) UV Lamp Cartridges
(14) Carriage Guard
(15) Purge Valves