Operator Interface Hardware - Oce Arizona 550 GT User Manual

Operator Interface Hardware

Operator Interface Hardware
Introduction
The Operator interacts with printer components to print, maintain, and monitor the
state of the printer. This section identifies and explains the functions of the hardware.
[43] Printer Hardware
Operator Interface Components
Hardware Interface Components
Component
1) Main Power
Switch
2) Operator Control
Station
3) Vacuum Zone
Control
4) Vacuum Table
Foot Pedal
5) Vacuum Bleed
Valve
6) Print Button
42 Chapter 4 - How to Navigate the User Interface
User Manual: Arizona 550 GT - Version 1.2, Revision B - 2012
#
Function
Turns the printer On and Off.
Consists of a podium stand, an LCD display monitor, a
mouse, and an emergency stop button. The printer control
software is displayed here.
Three vacuum zone control handles determine which of the
three print zones on the printer table will be active when the
vacuum pump is switched on.
Toggles the table vacuum on/off. Vacuum must be on prior
to starting a print.
Adjusts the level of vacuum suction applied to the media. Less
vacuum reduces artifacts caused by suction when imaging on
flexible media.
Starts the print job.