Roll Media Option Maintenance; Rmo Maintenance Guidelines - Oce Arizona 550 GT User Manual

Roll Media Option Maintenance

RMO Maintenance Guidelines

Introduction
The Océ Arizona 550 GT operator is responsible for the regular maintenance of the
printer and, if it is installed, the roll media option. When the RMO unit is kept clean
and free of blemishes and defects, you will be ensured of accurate media transport and
optimal print quality. This section provides information about what is required for
proper RMO maintenance and cleaning.
Note:
Any time there is any foreign matter or debris on the platen or the capstan it must be
removed immediately. Any spilled UV ink must be removed immediately, before it can
cure from exposure to light.
RMO Maintenance
The following table provides our recommended maintenance activities. This is a minimum
requirement and frequency will depend on environmental conditions and operator work
habits. How to clean the capstan is explained in detail in the next section.
#
Maintenance Action
Clean the platen
Clean the capstan
Clean the media loading
bay
Contaminant
Ink
Glue (release liner)
Silicon (release liner)
Paper dust
Coffee, tea, lemonade, milk, etc.
Ink (cured, uncured)
Glue (release liner)
Silicon (release liner - e.g. Avery control tag 180)
Dust
Ink
Chapter 11 - Printer Maintenance
RMO Maintenance Guidelines
251