Roll Media Option Maintenance; Rmo Maintenance Guidelines - Oce Arizona 200 GT User Manual

Roll Media Option Maintenance

RMO Maintenance Guidelines

Introduction
The Arizona 200/250 GT operator is responsible for the regular maintenance of the
printer and, if it is installed, the roll media option. When the RMO unit is kept clean
and free of blemishes and defects, you will be ensured of accurate media transport
and optimal print quality. This section provides information about what is required
for proper RMO maintenance and cleaning.
Note: Any time there is any foreign matter or debris on the platen or the capstan it
must be removed immediately. Any spilled UV ink must be removed immediately,
before it can cure from exposure to light.
RMO Maintenance
The following table provides our recommended maintenance activities. This is a
minimum requirement and frequency will depend on environmental conditions and
operator work habits. How to clean the capstan is explained in detail in the next
section.
[38]
Maintenance Action
Clean the platen
Clean the capstan
Clean the media loading
bay
Contaminant
Ink
Glue (release liner)
Silicon (release liner)
Paper dust
Coffee, tea, lemonade, milk, etc.
Ink (cured, uncured)
Glue (release liner)
Silicon (release liner - e.g. Avery control tag 180)
Dust
Ink
RMO Maintenance Guidelines
177