Welding Menu; General; Control Panel And Display - Car-O-Liner CTR9 Instruction Manual

CTR9

5 Welding menu

5.1

General

5.2

Control panel and display

Change tool
Toggle between different tools
(C-Tong, Multi function gun, A-Tong)
and menu 2 for user settings.
Measured
electrode force
(daN), bottom
and set value, top
Measured air
pressure (bar),
bottom
and set value, top
Coating selection
for pre pulse
Toggle between Zink coat,
Ed coat, Ed coat+,
Dry glue
49023, EN - rev. 4, 2020-01
The following welding programs are available on the CTR9 welder:



Active tool display
Displays active tool (C-Tong,
Multi function gun or A-Tong)
or Weld logger.
Coating display Welding
Displays the mode
selected coating (Auto2)
for pre pulse
Number of
metal sheets
Figure 4.4 The CTR9 control panel and display
Two sided spot welding
Multi-function gun applications:
Dent puller, Welding of clip rivets, Welding of screws and
Carbon rod for shrinking, Welding of nuts, Stich welding.
A-Tong mode
Main display
Displaying selected
number of metal sheets,
material, and thickness
of material, tools for
Multi function gun etc
Welding
Welding
time
current
Type of
material
Car-O-Liner Group AB
WeldLogger Water
Activate the weld For turning off/on cooling
logger water pump when chang-
ing electrodes
Set buttons
Use up/down but-
tons to set number
of metal sheets,
type or thickness
of material.
Use left/right but-
tons to change from
e.g type to thickness
of material or Enter
function.
Welding processes
Toggle between
Full auto
(default setting)
Auto1
Auto2
Manual
Menu 1 / Menu 2
Displays menu 1
Thickness
with previous log
of material
files from Weld
logger or menu 2
with user settings
67