Zoneflex 7343 Access Point - Ruckus Wireless ZoneFlex User Manual

Rear Panel
Figure 6 shows the rear panel of the ZoneFlex 7341. For a description of each rear
panel part, refer to Table
Figure 6. ZoneFlex 7341 rear panel
1
2
Table 9. ZoneFlex 7341 rear panel elements
Number Item Name
1 OPT Button
2 HARD RESET Button Pressing, and then quickly releasing this internal
3 10/100/1000 PoE
Port
4 Power

ZoneFlex 7343 Access Point

ZoneFlex 7343 features five LEDs on its front panel, and buttons and connectors on
its rear panel.
Front Panel
Figure 7 shows the front panel of the ZoneFlex 7343. For a description of each front
panel part, refer to Table
Getting to Know the Access Point Features
9.
3
Description
Not active in this model at this time.
button reboots the AP. Pressing and holding it for
six seconds resets the AP to factory default settings.
CAUTION! Resetting the AP to factory default
settings will erase all settings that you configured
previously.
One RJ-45 port for a 10/100/1000 PoE (Power over
Ethernet, 802.3af) connection.
Connect the power adapter (12 VDC/1.25A) to this
socket. Power can also be supplied via the 10/100/
1000 PoE (802.3af) port.
10.
Introducing the ZoneFlex Access Point
4
13