Upgrading The Firmware; Upgrading Manually Via Ftp Or Tftp - Ruckus Wireless SmartCell 8800-S User Manual

Upgrading the Firmware

You can use the Web interface to check for software updates/upgrades for the
firmware built into the AP. You can then apply these updates to the device in one
of two ways: (1) manual updating on an as-needed basis or (2) automating a regularly
scheduled update.
Before starting, decide which option you want to take:
• Automate a regularly scheduled update.
• Run a one-time manual update right now.
By default, the automatic upgrade option is disabled.
To get started with upgrading the firmware, go to Maintenance > Upgrade. When
the Maintenance > Upgrade options appear, decide which upgrade method to use.
Each of the upgrade options listed on the Upgrade page are discussed in the
following sections.
Figure 56. The Maintenance > Upgrade page

Upgrading Manually via FTP or TFTP

1 In the Upgrade Method options, click FTP (default) or TFTP.
2 Click the host name field, and then type the URL of the server. Or click the IP
address field, and then type the IP address of the server. Remember to start the
URL with
ZoneFlex Outdoor Access Point 100.0.0 User Guide, 800-70725-001 Rev B
.
ftp://
Upgrading the Firmware
Upgrading Manually via FTP or TFTP
136