Logging Into The Ap's Web Interface Via Cmts - Ruckus Wireless ZoneFlex 7781CM Installation Manual

Installing the 7781CM in the Field
Verifying CM and AP Operation

Logging Into the AP's Web Interface via CMTS

1. Obtain the IP address that is assigned to the AP. You can obtain this information from
the DHCP server at the CMTS.
2. Connect an administrative computer to the same subnet as the 7781CM.
3. On the administrative computer, start a Web browser.
4. In the address bar, enter the IP address that is assigned to the AP. The AP web interface
displays a login prompt.
5. In User name, type super.
6. In Password, type sp-admin.
7. Click Login. The Web interface appears, displaying the Status > Device page.
You have logged into the AP's web interface.
Checking the TR069 Status (FlexMaster Management
Only)
If you configured the AP to report to a FlexMaster server on the network, make sure you
verify that it can successfully communicate with the FlexMaster server. You can do this by
checking the TR069 status on the AP's Web interface through the CMTS.
1. Log in to the AP's Web interface through the CMTS as described in
AP's Web Interface via CMTS"
2. Go to the Administration > Management page.
3. Scroll down to the TR069 Status section.
4. Check the value for Last successful contact. If it shows a date in green, this indicates
that the AP was able to communicate successfully with FlexMaster.
Continue with
Associating a Wireless Client with the AP
1. In the client device's wireless interface, select the SSID configured in the
Wireless # Settings"
2. Connect the client device to the selected WLAN SSID.
You have verified that the CM and AP are operating correctly.
48
on page 48.
Associating a Wireless Client with the
on page 33.
"Logging Into the
AP.
"Configuring