Upgrading Manually Via The Web; Upgrading Manually Via Ftp Or Tftp; Scheduling An Automatic Upgrade - Ruckus Wireless ZoneFlex 2925 User Manual

Upgrading Manually via the Web

1. In the Upgrade Method options, click Web.
2. Click the Web Options URL field, and then type the URL of the download Web
site. Remember to start the URL with "http://".
3. You can change the Image Control File filename extension as noted here:
• Replace any file names ending in .rcks with the .html extension
• Replace any file names ending in .fI7 with the .html extension
Do not change the Username or Password entries.
CAUTION:
4. Click Perform Upgrade. A status bar appears during the upgrade process.
5. After the upgrade is completed, you must manually reboot the AP.

Upgrading Manually via FTP or TFTP

1. In the Upgrade Method options, click FTP or TFTP.
2. Click the host name field, and then type the URL of the server. Or click the IP
address field, and then type the IP address of the server. Remember to start the
URL with ftp://.
Do not change any of the Image Control File, Username, or Password
CAUTION:
entries.
3. Click Perform Upgrade. A status bar appears during the upgrade process.
4. After the upgrade is completed, you must manually reboot the AP.

Scheduling an Automatic Upgrade

1. In the Upgrade Method options, click the button by your preferred choice.
2. Enter the appropriate information in the Host name field or IP address field.
CAUTION: Do not change any of the Image Control File, Username, or Password
entries.
3. Verify that the Auto Upgrade: Enabled option is checked (active).
4. Toggle the Interval to Check for Software Upgrade drop-down list to select your
preferred interval.
5. You have two options at this point:
• Click Perform Upgrade, which will start the process and the clock. The next
upgrade will occur at the selected interval.
Managing the Access Point
Upgrading the Firmware
79