Viewing Flexmaster Management Status - Ruckus Wireless ZoneFlex 2741 User Manual

Table 14. TR-069 and SNMP Management Options
Option
Associated-Clients
Monitoring Mode
4. Click Update Settings to save your changes. A confirmation message appears at
the top of the page.
You have completed the management access options.

Viewing FlexMaster Management Status

If you configure the AP to be managed by FlexMaster, you can check the TR-069 Status
section on the Administration > Management page.
information that the AP provides.
Table 15. TR-069 status information
Status Information
Currently using
Last attempted contact
Last successful contact
Enabling Other Management Access Options
Description
When enabled, the AP monitors the association
and disassociation activities of wireless clients and
sends this information to FlexMaster. Available
options include:
• Disable (default): Select to turn off client
association monitoring. When this option is
selected, the AP will not send client association
information to FlexMaster; Flexmaster will
need to retrieve this information from the AP.
• Passive: Select to enable client association
monitoring and send related information to
FlexMaster at the next inform interval.
• Active: Select to enable client association
monitoring and define the monitor interval
(Interval). The AP will check for client
association based on the defined Interval (in
seconds), and then send related information
FlexMaster as soon as an association event is
detected.
Table 15
Description
Shows the FlexMaster server IP address or
URL with which the AP is currently registered
Shows the date and time of the AP's last
attempt to contact FlexMaster. Date and time
are specified in GMT (or UTC), which are
accurate if a Network Time Protocol (NTP)
server is configured.
Shows the date and time of the AP's last
successful contact with FlexMaster.
Managing the Access Point
lists the TR-069 status
87