Table of Contents
Advertisement
M ounting the U-Joint Bracket to the M ain M ounting
Bracket
1. Position the U-joint bracket on the main mounting bracket. (Note the orientation.)
Figure 20.
U-Joint Bracket Attached Horizontally to the Main Mounting Bracket
3
Table 10. Main Mounting Bracket and U-Joint Bracket
No. Description
1
Main Mounting Bracket
2
U-Joint Bracket
3
Small M6 Bolt and Washer Sets
2. Use four small M6 bolt and washer sets to mount the U-joint bracket to the main
mounting bracket. Tighten the bolts to 9.5 N.m (7 ft-lbs).
3. Continue with
" Attaching the Main Mounting Bracket to a Flat Surface"
" Attaching the Main Mounting Bracket to a Wooden Pole"
the Main Mounting Bracket to a Metal Pole"
Attaching the M ain M ounting Bracket to a Flat Surface
The main mounting bracket can be attached to a flat surface using small or large bolts or
screws as described in
WARNING: Ruckus Wireless strongly recommends that you wear eye protection before
drilling holes in the mounting surface.
1. Place the main mounting bracket at the location on the mounting surface where you
want to mount the AP .
2. Use the holes on the main mounting bracket as a template to mark the locations of
the mounting holes.
1
2
Table
9.
Installing the SC8800-S AP in the Field
Mounting the Access Point
on
page
40, or
on
page
42.
on
page 39
or
" Attaching
39
Advertisement
Table of Contents
