S1700 Managed Series Ethernet Switches
Web User Manual
Figure 10-7 Create a SNMP Host
Step 3 Enter IP address of SNMP host in IPv4 Address or IPv6 Address field.
Step 4 Select SNMP protocol version from User-based Security Model list.
Step 5 Select type of encryption from Security Level list.
Step 6 Enter group name in Community String / SNMPv3 User Name field.
Step 7 Click Apply button to apply all the changes made.
----End
10.1.5 SNMP Group
Create a SNMP group and user belong to SNMP group (to create in the SNMP users table),
you can view or set the specified view. These views must be created in SNMP View.
Click Network>SNMP>SNMP Group, the configuration page is displayed as follows.
Figure 10-8 SNMP Group
Table 10-5 Parameters of SNMP Group
Item
Group Name
Issue 05 (2012-10-25)
Description
Up to 32 characters, used to identify the SNMP user group.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Network
181