Huawei S1700 Series Web User Manual page 137

S1700 Managed Series Ethernet Switches
Web User Manual
Item
Supp-Timeout
Server-Timeout
MaxReq
ReAuth Period
ReAuthentication After successful authentication, switch allows the client to
Status
Handshake
Period
Max User
Configure 802.1X of Interface
Step 1 Click Security>802.1X.
Step 2 Click Interface Configuration in tab.
Step 3 Click checkbox on the left of interface to be configured to 802.1X, and click Configure button,
opening configuration page of interface 802.1X.
Issue 05 (2012-10-25)
Description
Sets the time that a switch interface waits for a response to an EAP
request from a client before re-transmit an EAP packet. (Range: 1-120;
Default: 30 seconds)
Sets the time that a switch waits for a response to the authentication
server to avoid re-transmitting an EAP packet (Range: 1-120; Default:
30 seconds)
Sets the maximum number of times the switch interface will retransmit
an EAP request packet to the client before it is out of the authentication
session time. (Range: 1-10; Default 2)
Sets the time interval after which a successful authentication client must
be re-authenticated. (Range: 60-7200; Default: 3600 seconds)
re-authenticate. Re-authentication can check whether the current user is
online or legal.
Check whether the interface is used to enable or disable authentication.
Authenticator indicates enabling the authentication function on the
interface. At this time, only the user who passes the authentication
process can access the network.
None indicates disabling 802.1X on the interface.
Note: if enabling 802.1X on an interface with MAC-based VLAN
disabled, VLAN assignment works abnormally under host-based mode.
After user authentication passes, the handshake function is enabled, the
switch will send Request/Identity to detect whether the user is online
according to the configured handshake interval. If the user response
does not receive exceeding three times (Request/Identity), the switch
will disconnect automatically. The range is 5-1024, and the default is 15
seconds.
In Host-based mode, it means the maximum number of host to which the
interface is connected (Range: 1-256; Default: 16).
In Port-based mode, the interface parameter MAX User cannot be set
and the displayed value is insignificance.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Security
127