Interface - Huawei S1700 Series Web User Manual

S1700 Managed Series Ethernet Switches
Web User Manual
Table 9-31 Parameters of Global Settings
Item
Auto Recovery
Automatic Recovery Interval
Manual Recovery
Query
VLAN ID
Status
Enable DAI of VLAN
Step 1 Click Security> DAI.
Step 2 Click Global Parameter in Tab.
Step 3 Click the checkbox on the left side of VLAN of DAI function to be enabled, and then click
Configure button, the configuration page is displayed as follows.
Figure 9-47 Enable VLAN DAI
Step 4 Enable DAI status of VLAN in Status field.
Step 5 Click Apply button to apply the changes made.
----End

9.10.2 Interface

Click Security> DAI> Interface, the configuration page is displayed as follows.
Issue 05 (2012-10-25)
Description
The un-trusted interface can be reset to enabled status
when un-trusted interface is closed for ARP message over
speed.
Enter the automatic recovery time. Values range from 30
to 86400 seconds, the default is 300 seconds.
Click Apply button to restore the closed interface
manually.
Search DAI status information of specified VLAN in
VLAN ID.
VLAN ID number
DAI configuration status on VLAN
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Security
159