Huawei S1700 Series Web User Manual page 120

S1700 Managed Series Ethernet Switches
Web User Manual
Figure 7-17 New Traffic Behavior
Table 7-13 Parameters of Configuring Traffic Behavior
Item
Behavior Name
Action
Traffic Statistics
Configure Traffic Policing
Configure Re-mark Action
Configure Redirection
Step 3 Configure the needed parameter
Step 4 Click Apply button to apply all the changes made.
----End
Issue 05 (2012-10-25)
Description
Behavior Name
Action executed by this behavior. Permit or deny messages
matched to classifier rule.
Whether to enable traffic statistics function for message
matching to traffic classification rule. When enabled, click
traffic policy in application of traffic policy to display
statistics.
Measure the matched traffic and color the classified traffic
according to the specified Mode and corresponding
parameters. There are three modes: "Rate", "srTCM" and
"trTCM".
Remark the matched messages
802.1p priority: Mark priority for message and make queue
strategy according to this priority.
Local priority: Specify local queue number.
IP precedence: Marks priority of IP message.
DSCP priority: Marks DSCP value of IP message.
Alternatively select 802.1p priority or local queue.
Alternatively select IP priority or DSCP priority.
Redirect the matched message to specified interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 QoS Configuration
110