S1700 Managed Series Ethernet Switches
Web User Manual
Figure 10-6 SNMP Host
Table 10-4 Parameters of SNMP Host
Item
Host IP
User-based Security Model
Security Level
Community String / SNMPv3
User Name
Create a SNMP Host
Step 1 Click Network>SNMP.
Step 2 Click SNMP Host in Tab, and click New to add a SNMP host, the configuration page is
displayed as follows.
Issue 05 (2012-10-25)
Description
The IP address of remote management site which serves as
SNMP host of switch
SNMPv1: Specify the version of SNMP that will be used.
SNMPv2c: specify the version of SNMP that will be used.
SNMPv2c supports the centralized and distributed network
management strategies. It includes the improvements of
Structure of Management Information and adds some
security features.
SNMPv3: Specify the version of SNMP that will be used.
SNMPv3 provides secure access for equipment by
authenticating and encrypting the packets on the network.
NoAuthNoPriv: Specify NoAuthNoPriv security level,
which means the authentication and the encryption is not
required by the packet between the specified switch and the
remote SNMP manager.
AuthNoPriv: Specify AuthNoPriv security level, which
means only the authentication is required by the packet
between the specified switch and the remote SNMP
manager.
AuthPriv: Specify AuthPriv security level, which means
the authentication and the encryption are both required by
the packet between the specified switch and the remote
SNMP manager.
Community string or SNMP V3 user name.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Network
180