Snmp Host - Huawei S1700 Series Web User Manual

S1700 Managed Series Ethernet Switches
Web User Manual
Item
View Name
Access Right
ACL
Create a SNMP Community
Step 1 Click Network > SNMP.
Step 2 Click SNMP Community in Tab, and click New button to add a SNMP community, the
configuration page is displayed as follows.
Figure 10-5 Create a SNMP Community
Step 3 Enter a user-defined community name in Community Name field, such as "comaccess".
Step 4 Enter the view name created in SNMP View in View Name field, such as "all".
Step 5 Select Ready Only from Access Right list.
Step 6 Click Apply button to apply all the changes made.
----End

10.1.4 SNMP Host

SNMP host list is used to set the IP address of device that receives the SNMP Trap
information. Only the host configured SNMP can receive Trap messages after Trap is
configured.
Click Network>SNMP>SNMP host, the configuration page is displayed as follows
Issue 05 (2012-10-25)
Description
Up to 32 characters used to identify the MIB object groups, which
allow the remote SNMP manager to access the switch MIB objects.
View name must be created in SNMP view table.
Read Only: The community members that use SNMP community
string can read the contents of the MIB on the switch.
Read Write: The community members that use this SNMP
community string can read and write MIB on the switch
Specify the binding ACL ID. If it is not specified, which means it is
not controlled by ACL.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Network
179