Huawei S1700 Series Web User Manual page 81

S1700 Managed Series Ethernet Switches
Web User Manual
Item
Report
interval
Dynamic Mrouter Aging
Time
General
Response Time
Specific
Response Time
Check Router Alert
Send Router Alert
Set the parameters of Snooping VLAN
Step 1 Click Service Management>IGMP Snooping >VLAN Parameter.
Step 2 Click the Edit icon on the right of VLAN entry of the parameter needed to modify, opening
the configuration page shown as below.
Figure 5-36 Edit IGMP Snooping VLAN
Issue 05 (2012-10-25)
Description
Suppression IGMP Snooping will hold the message with same content in a
certain time. It supports the suppression to the member
message of IGMPv1, IGMPv2, and IGMPv2 Leave. 0 indicates
disable message suppression function.
The aging time for configuring dynamic route; 0 represent the
aging time of dynamic route with global configuration.
Query Max The maximum permissible time of the host sending IGMP
response message after receives general group query. The
range of permissible time is 1-25 seconds, and the default is 10
seconds. 0 indicates maximum response time of general group
with global settings.
Query Max The maximum permissible time of the host sending IGMP
response message after receives specific group query. The
range of permissible time is 1-5 seconds. 0 indicates maximum
response time of specified group with global settings.
Check the Router-Alert options in IGMP message header; if
use this function, then IGMP message‟s IP head received by the
current VLAN must be attached to Router Alert (IGMPv1
message excluded), otherwise drop this message.
Router-Alert option includes whether to send router alert in
IGMP message header.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Service Management
71