Traffic Behavior - Huawei S1700 Series Web User Manual

S1700 Managed Series Ethernet Switches
Web User Manual
Item
Match Priority
Match VLAN
Match MAC Address
Match Ethernet
Match ACL
Step 3 Select the mode matched by traffic classifier to message.
Step 4 Click Apply button to apply all the changes made.
----End

7.8.2 Traffic Behavior

Click QoS>Traffic Management > Traffic Behavior to view traffic behavior configured on
switch; the configuration figure is shown as below.
Figure 7-16 Traffic Behavior
Table 7-12 Parameters of Traffic Behavior
Item
Behavior Name
Action
Add a Traffic Behavior
Step 1 Click QoS>Traffic Management> Traffic Behavior.
Step 2 Click New button to add a traffic behavior, opening the configuration page shown as the
figure below.
Issue 05 (2012-10-25)
Description
Match messages of the specified priority in VLAN
802.1p.
Match messages of the specified VLAN in VLAN ID.
Match messages of the specified MAC address in source
MAC Address/mask.
Match Ethernet messages of the specified type in Ethernet
type.
Match messages specified in ACL number/ ACL name.
Description
Behavior profile name
Action executed by this behavior.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 QoS Configuration
109