Huawei S1700 Series Web User Manual page 97

S1700 Managed Series Ethernet Switches
Web User Manual
Table 6-5 Parameters of Standard IP Rule
Item
ACL ID
Rule ID
Action
Match IP Address
Time Range Name
Step 3 Configure the needed parameter.
Step 4 Click Apply button to apply all the changes made.
----End
Create an Extending IP Rule
Step 1 Click ACL>ACL Profile.
Step 2 Click a created extending IP rule in the ACL list box, and click New button in list box of ACL
Rule to add a new rule, opening the configuration page shown as the figure below.
Figure 6-6 Create Extended IP Rule
Issue 05 (2012-10-25)
Description
ACL entry ID that the rules belongs to.
Enter an ID for rule and the range is 1~65535. If not specified, the
system, according to rule step, will distribute automatically.
Specify switch to permit or deny data stream that matches to the rule.
All Source IP: specify this rule to be applied to all IP data packages.
Specify Source IP /Mask: specify this rule to be applied to the IP data
package of specified IP /mask. The IP address will match the whole
field if no mask entered.
Click Please Select button to specify effective time for the rule.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 ACL Configuration
87