Mac Filter; Migrate Mac Table - Huawei S1700 Series Web User Manual

S1700 Managed Series Ethernet Switches
Web User Manual

5.4.5 MAC Filter

After this function is enabled, only the data of the computer in static MAC address table can
pass through the switch.
Click Service Management > MAC > MAC Filter page to open the page as shown in
following figure, which displays MAC filter status information of all the interfaces
Figure 5-23 MAC Filter
MAC Filter Configuration
Step 1 Choose the check box in the left-hand column of the interface list to be edited, and then click
Configure button to modify the MAC filter function for interface, the configuration page is
shown as the figure below.
Figure 5-24 MAC Filter Configuration
Step 2 Click Enable button to enable MAC filter function of the interface.
Step 3 Click Apply button to apply all the changes made.
----End

5.4.6 Migrate MAC Table

Migrate MAC Table lists the changed information of the same MAC address among the
switch interfaces.
Issue 05 (2012-10-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Service Management
54