S1700 Managed Series Ethernet Switches
Web User Manual
Step 4 Enter MIB objet of the data statistic in Data Source field.
Step 5 Enter a name in Owner field.
Step 6 Enter maximum historical entries in Buckets field.
Step 7 Enter the received message period accounted by history groups in Interval field.
Step 8 Click Apply button to apply all the changes made.
----End
View the detail information of RMON History Group
Step 1 Click Network>RMON.
Step 2 Click History in Tab.
Step 3 Click the detail information to be viewed in history list, and click Detail Info button to view
the information, the configuration page is displayed as follows.
Figure 10-19 Details of History
----End
10.2.3 Alarm
RMON alarm management specifies alarm variables (such as the total number of packets
received by the interface) for monitoring. When user defines alarm entry, the system will
follow the defined period to obtain the value of the monitored alarm variable. If the value of
alarm variable is greater than or equal to the Rising threshold, a raising of alarm event will be
triggered. If the value of alarm variable is less than or equal to the falling threshold, a fall
alarm event will be triggered, and alarm management will make the appropriate treatment
according to the definition of events.
Click Network>RMON>Alarm, the configuration page is displayed as follows.
Figure 10-20 Alarm
Issue 05 (2012-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Network
190