One Key Bind - Huawei S1700 Series Web User Manual

S1700 Managed Series Ethernet Switches
Web User Manual
Create a Static Binding Table Entry
Step 1 Click Security> IPSG
Step 2 Click Static Binding Table in Tab.
Step 3 Click New button to add a new binding table entry.
Figure 9-44 New Binding Table
Step 4 Enter relative information of static binding table in the page.
Step 5 Click Apply button to apply the changes made.
----End

9.9.3 One Key Bind

One Key Bind is used to add IPSG binding entry in ARP table on switch.
Click Security> IPSG> One Key Bind, the configuration page is displayed as follows.
Figure 9-45 One Key Bind
Table 9-30 Parameters of One Key Bind
Item
Interface Name
VLAN ID
MAC Address
IP Address
Bind State
Bind Settings
Issue 05 (2012-10-25)
Description
Interface Number
Host VLAN ID
Host MAC address
Host IP address
Whether to bind it as IPSG binding entry
Click this button, bind/unbind the entry to IPSG binding table.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Security
157