Huawei S1700 Series Web User Manual page 194

S1700 Managed Series Ethernet Switches
Web User Manual
Item
Priv Protocol
ACL
Create a new SNMP User
Step 1 Click Network>SNMP.
Step 2 Click SNMP User in Tab, and click New to add a SNMP User, the configuration page is
displayed as follows.
Figure 10-11 Create a SNMP User
Table 10-7 Parameters of Creating a SNMP User
Item
User Name
Group Name
SNMP Version
SNMP V3 Encryption
Password
ACL
Step 3 Enter the user name to be created in User Name field, such as "user1".
Issue 05 (2012-10-25)
Description
The encryption protocol, which can be set as DES (DES 56-bit
encryption based CBC-DES (DES-56) standard), or does not use any
encryption protocol.
Specify the binding ACL ID. If not specified, which means it is not
controlled by ACL.
Description
User name, up to 32 characters, is used to identify the SNMP user.
The SNMP group name that the user belongs to.
Specify SNMPv3 that will be used.
None: Indicates do not use the authentication protocol.
Password: Usie password for authentication and encryption.
Authentication algorithm: Select the authentication protocol,
which can be MD5 (using HMAC-MD5-96 Authentication
Protocol) or SHA (HMAC-SHA authentication protocol to use).
Encryption algorithm: Select the encryption protocol, which can
be set as DES (DES 56-bit encryption based CBC-DES
(DES-56-bit) standard), or does not use any encryption protocol.
Specify the binding ACL ID. If not specified, which means it is
not controlled by ACL.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Network
184