Huawei S1700 Series Web User Manual page 77

S1700 Managed Series Ethernet Switches
Web User Manual
Figure 5-31 STP Region Information
Table 5-20 Parameters of MSTP Region
Item
Region Name
Revision Level
Instance
Mapped VLANs
Add MSTP Instance
Step 1 Click Service Management>STP>MSTP Region.
Step 2 Click Add button to create a new MSTP Region, the configuration is shown as the figure
below.
Figure 5-32 Add CIST
Step 3 Select the instance number needed to add in Instance bar.
Step 4 Click Apply button to apply all the changes made.
----End
Issue 05 (2012-10-25)
Description
Specify MST domain name joined by the switch; the
domain name can only identify MSTI (Multiple
Spanning Tree Instance).
If domain name is not set, the MAC address of the
device operating MSTP will be displayed.
This value and domain name altogether identifies the
MSTP protocol configured on switch. The value range
is 0~65535; default is 0.
Display the MST instance ID currently configured on
switch. The default CIST is common and internal
spanning tree of MSTI.
Display VLAN ID mapped to specified MST instance.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Service Management
67