Statistics On Interface - Huawei S1700 Series Web User Manual

S1700 Managed Series Ethernet Switches
Web User Manual
Interface auto-negotiation function must be disabled when user configures an interface
working in specified speed/duplex mode.
When auto-negotiation function is used, optimal configuration will be performed to link
among interfaces according to capability of two ends.
Speed and duplex of Giga SFP interface are fixed as 1000full.
Table 4-2 Parameters of Basic Attributes Configuration
Item
Interface Name
Admin Status
Flow Control
Negotiation
Duplex
Speed
Input Rate Limit
Output Rate Limit
Jumbo Frame
Description
Step 3 Configure parameters of interface.
Step 4 After that, click Apply to apply all the changes made. Use Basic Attributes page to view
status of valid switch interface.
----End

4.1.2 Statistics on Interface

Click Interface Management > Ethernet Interface > Statistics on Interface page to view
statistics information for each interface; statistics on interface is accounted after device startup
completed, the refresh frequency is 1/SEC.
Issue 05 (2012-10-25)
CAUTION
Description
Display the Interface number.
Enable/Disable the interface.
Enable/Disable flow control function of interface.
Enable/Disable automatic negotiation of interface.
Configure duplex mode of interface.
Configure operation speed of interface.
Configure input speed limit of interface.
Configure output speed limit of interface.
Specify the size of Jumbo frame on interface.
Enter the description about interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Interface Management
28