Huawei S1700 Series Web User Manual page 192

S1700 Managed Series Ethernet Switches
Web User Manual
Item
User-based Security Model SNMPv1: specify the SNMPv1 will be used.
Security Level
Read View
Write View
Notify View
ACL
Create a SNMP v3 Group named "public"
Step 1 Click Network>SNMP.
Step 2 Click SNMP Group in Tab, and click New to add a SNMP group, the configuration page is
displayed as follows.
Issue 05 (2012-10-25)
Description
SNMPv2c: specify the SNMPv2c will be used. SNMPv2c
which supports the centralized and distributed network
management strategies. It includes the improvements of
Management Structure of Management Information and adds
some security features.
SNMPv3: specify the SNMPv3. SNMPv3 provides secure
access for equipment by authenticating and encrypting the
packets on the network.
NoAuthNoPriv: specify NoAuthNoPriv security level, which
means authentication and encryption are not required by the
packet between the specified switch and the remote SNMP
manager.
AuthNoPriv: specify AuthNoPriv security level, which means
only the authentication is required by the packet between the
specified switch and the remote SNMP manager.
AuthPriv: specify AuthPriv security level, which means the
authentication and the encryption are both required by the
packet between the specified switch and the remote SNMP
manager.
Name of the read-only view group
Name of the writable & readable view group
Name of view which receives Trap information. User of this
group can receive SNMP Trap messages generated by SNMP
agent of switch.
Specify the binding ACL ID. If not specified, which means it
is not controlled by ACL.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Network
182