S1700 Managed Series Ethernet Switches
Web User Manual
Figure 10-25 Port Settings
Table 10-14 Parameters of Port Settings
Item
Query
Interface
Notification
Admin Status
IPv4(IPv6)Address
Configure the basic parameters of the interface
Step 1 Click Network>LLDP.
Step 2 Click Port Settings in Tab.
Step 3 Select the check box at the left side of the parameter, and click Configure button, the
configuration page is displayed as follows.
Figure 10-26 Parameters of LLDP Interface
Issue 05 (2012-10-25)
Description
Search the LLDP settings of specified interface in Interface Name.
Port number.
Whether the interface will send SNMP Trap information.
Configure the Send and Receive mode of LLDP protocol data unit.
The options are: send only, receive only, send and receive, and
disable.
Management address of interface
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Network
195