Eth-Trunk - Huawei S1700 Series Web User Manual

S1700 Managed Series Ethernet Switches
Web User Manual
Item
Collision on the Interface
Giants Error Packets
CRC Error Packets
Aborts Error Packets
Details of Statistics on Interface
Step 1 Click Interface Management > Ethernet Interface > Statistics on Interface.
Step 2 Choose the check box in the left-hand column of the interface to be viewed for details from
the list, and then click Details button to view the detailed statistics data of designated interface,
the configuration page is shown as the figure below.
Figure 4-4 Details of Statistics on Interface
Step 3 Click Close, to return to the configuration page of Statistics on Interface.
----End

4.2 Eth-Trunk

This section describes a method to configure Eth-Trunk.
User is allowed to set up multiple links among multiple switches. Link Aggregation is a
method of binding a group of physical interfaces as a logical interface to increase bandwidth.
At most 12 manual Trunks and static LACP can be set up at the same time.
This device supports manual Trunk and link aggregation control protocol (only supports static
LACP). Manual Trunk needs a manual setting of links at both ends, and must be compatible
with Cisco EtherChannel standard. On the other hand, a Trunk link can be connected between
the LACP interface of a device and that of another device. User is allowed to configure any
member with an interface number of LACP as long as these numbers are not configured as
Issue 05 (2012-10-25)
Description
Total collision packets transmitted on this interface.
Total Giants error packets transmitted on this interface.
Total CRC error packets transmitted on this interface.
Total Aborts error packets transmitted on this interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Interface Management
30