Huawei S1700 Series Web User Manual page 49

S1700 Managed Series Ethernet Switches
Web User Manual
Table 5-2 Parameters of Interface VLAN Attributes
Item
Interface Name
Link Type
Ingress Checking
Access VLAN
Trunk Allowed VLAN
Native VLAN
Hybrid Untagged VLAN
Hybrid Tagged VLAN
Issue 05 (2012-10-25)
Description
Display a list of interface.
Indicate VLAN membership mode for an interface (default:
Hybrid).
Access: set the port as an Access VLAN interface. The port
transmits tagged or untagged frames on a single VLAN
only.
Hybrid: specify an interface as hybrid VLAN interface. The
port may transmit tagged or untagged frames.
Trunk: specify an interface as VLAN Trunk interface. A
trunk is a direct link between two switches, so the interface
transmits tagged frames marked the source VLAN. Note
that frames belonging to the interface's default VLAN are
also transmitted as untagged frames.
Determine how to process the tagged frame, which is not
included in this VLAN. (Default: Enable)
Ingress filtering only affects tagged frames.
If ingress filtering is disabled and the interface receives a
tagged frame which is not included in this VLAN, these
frames will be flooded to all other ports within this VLAN.
If ingress filtering is enabled and the interface receives a
tagged frame, which is not included in this VLAN, then the
frame will be dropped.
Ingress filtering does not affect VLAN independent BPDU
frames, such as GVRP or STP. However, they do affect
VLAN associated BPDU frames, such as GMRP.
If the displayed link type is Access, the VLAN ID that the
interface belongs to, and the tagged or untagged frames
received on the interface will be tagged with the VLAN ID
(default : 1). The option can only be used when the link type
is Access.
If the displayed link type is Trunk, VLAN ID or list is
allowed to pass through the interface. This can only be used
when the link type is Trunk.
The VLAN ID (default: 1) of untagged frame which is
received on interface. If the received frame is untagged
frame, the frame will be added default VLAN ID. This can
only be used when the link type are Trunk and Hybrid.
If the link type is Hybrid, the untagged VLAN ID or list is
allowed to pass through the interface. This can only be used
when the link type is Hybrid.
If the link type is Hybrid, the Tagged VLAN ID or list is
allowed to pass through the interface. This can only be used
when the link type is Hybrid.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Service Management
39