Dynamic Neighbor - Huawei S1700 Series Web User Manual

S1700 Managed Series Ethernet Switches
Web User Manual
Figure 3-14 Static Neighbor
Table 3-13 Parameters of Static Neighbor
Item
Neighbor Address
Link Address
Interface Name
Status
Static Neighbor Table Configuration
Step 1 Click System Management > IPv6 Neighbor > Static Neighbor.
Step 2 Click New button to add new static neighborhood information, as shown in following figure.
Figure 3-15 Edit Static Neighbor
Step 3 Enter relevant static neighborhood information.
Step 4 Click Apply to apply all the changes made.
----End

3.9.2 Dynamic Neighbor

Click System Management > IPv6 Neighbor > Dynamic Neighbor page to display the IPv6
dynamic neighbor information detected by switch, the configuration page is shown as the
figure below.
Issue 05 (2012-10-25)
Description
IPv6 address of neighbor.
MAC address of neighbor.
Name of the interface.
Display the status of IPv6 neighbor address.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 System Management
S1700 Managed Series Ethernet Switches
23