Global Parameter Configuration - Huawei S1700 Series Web User Manual

S1700 Managed Series Ethernet Switches
Web User Manual
interface, the switch will automatically assign a Voice VLAN member tag for that interface. In
addition, users can also connect the interface to Voice VLAN members manually.

5.3.1 Global Parameter Configuration

Click Service Management > Voice VLAN > Global page to configure Voice VLAN global
parameters for switch, the configuration page is shown as the figure below.
Figure 5-9 Voice VLAN Global Settings
Table 5-4 Parameters of Voice VLAN Global Settings
Item
Global State
VLAN ID
VLAN Name
Priority
Aging Time
Configure VLAN ID of Voice VLAN as 2
Step 1 Click Service Management > Voice VLAN > Global.
Step 2 Choose Enable under Global State to enable Voice VLAN.
Step 3 Specified ID of VLAN ID is 2.
Issue 05 (2012-10-25)
Description
Enable automatic VoIP flow detection on the interface of switch (the
default is disable).
Set VLAN ID of enabled Voice VLAN. Voice VLAN is only enabled
on one VLAN.
Set VLAN name of enabled Voice VLAN. Voice VLAN is only
enabled on one VLAN.
Define CoS priority of interface in Voice VLAN. When Voice VLAN
is opened, the interface will forward the data based on the CoS field in
message. (Range: 0-7; Default: 6)
The interface will be deleted from Voice VLAN if it no longer receives
the VoIP traffic during a certain time (Range: 5-43200 minutes;
Default: 1440 minutes)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Service Management
44