Huawei S1700 Series Web User Manual page 43

S1700 Managed Series Ethernet Switches
Web User Manual
Add a Trunk Group
Step 1 Click Interface Management > Eth-Trunk, to display a page as shown in Figure 4-6.
Step 2 Click New button, and add a Trunk group to display a page as shown in following figure.
Figure 4-7 Add a Trunk
Step 3 Enter corresponding parameters of Trunk on configuration page.
Step 4 Click Apply to apply all the changes made.
----End
Display/Delete Trunk group
Step 1 Click Interface Management > Eth-Trunk, to display a page as shown in Figure 4-8, the list
shows all Trunks created on switch.
Figure 4-8 Display Trunk List
Step 2 Choose the check box in the left-hand column of Trunk to be deleted, then click Delete button
to delete Trunk.
----End
Configure Trunk Attribute List
Step 1 Click Interface Management > Eth-Trunk, to display a page as shown in Figure 4-8.
Step 2 Click Edit icon in the right-hand column of Trunk to be configured.
Step 3 Configure the required Trunk parameters.
Step 4 Click Apply to apply all the changes made.
----End
Issue 05 (2012-10-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Interface Management
33