S1700 Managed Series Ethernet Switches
Web User Manual
Figure 10-30 Dot1 TLVs
Table 10-17 Parameters of Dot1 TLVs
Item
Query
Interface Name
PVID State
VLAN Name State
VID
Protocol Identity State
Protocol Identity
Configure parameters of Dot1 TLVs for interface
Step 1 Click Network > LLDP.
Step 2 Click Dot1 TLVs in tab.
Step 3 Click the check box on the left side of the configuring Dot1 TLVs parameter interface, and
then click Configure to open the following page.
Figure 10-31 Configure Dot1 TLVs parameter
Step 4 Enable to publish the relevant parameter.
Issue 05 (2012-10-25)
Description
Search the Dot1 TLVs settings of specified interface in Interface
Name.
Interface number
Whether to publish PVID of the interface (Port VLAN ID).
Whether to publish the VLAN name on interface.
VLAN ID of the interface
Whether to publish the protocol identifier state of interface
The protocol accessed through this interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Network
198