S1700 Managed Series Ethernet Switches
Web User Manual
Enable DHCP Snooping for Interface
Step 1 Click Security> DHCP Snooping.
Step 2 Click Interface State Configure in Tab.
Step 3 Click checkbox on the left side of DHCP Snooping to be enabled, and then click Configure
button, the configuration page is displayed as follows.
Figure 9-35 Interface State Settings
Step 4 Select Enable in Status bar.
Step 5 Click Apply to apply the changes made.
----End
9.8.3 Interface Trust Settings
Click Security> DHCP Snooping> Interface Trust Settings, the configuration page is
displayed as follows.
Figure 9-36 Interface Trust Settings
Table 9-25 Parameters of Interface Trust Settings
Item
Query
Interface Name
Status
Issue 05 (2012-10-25)
Description
Search the state settings of specified interface in Interface Name.
Interface Number.
The trust status of Interface. The switch only processes the DHCP
message from trusted DHCP Server interface and then generates a
dynamic host binding entry.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Security
150