S1700 Managed Series Ethernet Switches
Web User Manual
Item
Asset ID
10.4.2 Interface
Click Network > LLDP -MED> Interface, the configuration page is displayed as follows.
Figure 10-39 Interface
Table 10-23 Parameters of Interface
Item
Query
Interface Name
Topology
Notification Status
LLDP-MED Capability TLV
LLDP-MED Network Policy
TLV
LLDP-MED Inventory TLV
Configure parameters of interface
Step 1 Click Network > LLDP-MED.
Step 2 Click Interface in tab.
Step 3 Click the check box on the left side of the interface which is to configure basic parameters,
and then click Configure to open the following page.
Issue 05 (2012-10-25)
Description
The switch asset identifier which is used for directory
managing and asset tracking.
Description
Search the LLDP-MED information of specified interface
in Interface Name.
Interface number
Change
Whether to change the topology of notification interface.
LLDP-MED TLV type that supported by switch.
The VLAN type, VLAN ID, and the priority that associated
with L2 and L3 applications of the switch interface.
The switch inventory information, such as the hardware
version, software version, serial number, etc.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Network
204