S1700 Managed Series Ethernet Switches
Web User Manual
9.2.2 Mode
Click Security> 802. 1 X> Mode, the configuration page is as follows.
Figure 9-6 Interface Authentication Mode
Table 9-5 Parameters of Interface Authentication Mode
Item
Interface Name
Mode
Configure Interface Authentication Mode
Step 1 Click Security>802.1X.
Step 2 Click Mode in tab.
Step 3 Click checkbox on the left of interface to be configured authentication mode, and click
Configure button, opening the configuration page shown as the figure below.
Figure 9-7 Configure Interface Authentication Mode
Step 4 Select authentication mode in pull down menu of Interface Control.
Issue 05 (2012-10-25)
Description
Interface Number
Port-based:In this mode, once a host passes the authentication, all the
other hosts can obtain the privilege of accessing the network.
Similarly, if one host fails the authentication or sends EAPOL exiting
message, all the other hosts cannot pass through the interface.
Host-based: In this mode, the host passing through this interface must
be authenticated respectively.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Security
125