Huawei S1700 Series Web User Manual page 15

S1700 Managed Series Ethernet Switches
Web User Manual
Menu
QoS
IP Routing
Security
Issue 05 (2012-10-25)
Sub-Menu
HTTP ACL
QoS Interface
CoS Mapping
DSCP Mapping
IP Precedence
Mapping
Service Level
Mapping
QoS Scheduler
SRED
Traffic
Management
Traffic Shaping
IPv4 Route
IPv6 Route
User Management
802.1X
Guest VLAN
Storm Suppression
Port Security
MAC-based Access
Control
Attack Prevent
DHCP Snooping
IPSG
DAI
MAC Attack
Interface Isolation
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Apply rules to HTTP protocol data of accessing
switch.
Configure trust model and default CoS value of
specified interface.
Perform mapping to CoS value and service grade.
Perform mapping to DSCP value and service grade.
Perform mapping to IP Precedence value and
service grade.
Map different service grades to hardware queue of
switch.
Configure QoS scheduling method and WRR
weighted value.
Configure SRED.
Create different classes of flows to control network
traffic.
Control the maximal transmission rate of interface,
and limit the output traffic of network.
Add and check static IPv4 routing.
Add and check static IPv6 routing.
Perform user account relevant configuration
Perform 802.1X relevant configuration
Configure Guest VLAN.
Perform the relevant configuration of storm control
and suppression.
Control network access.
Authenticate MAC address of device to achieve
authentication access.
Configure anti-attack settings.
Perform DHCP Snooping configuration.
Perform IP source protection configuration.
Perform dynamic address detection configuration.
Perform illegal message and MAC spoofing
configurations.
Perform interface isolation configuration
1 Client Setting
5