Sntp - Huawei S1700 Series Web User Manual

S1700 Managed Series Ethernet Switches
Web User Manual
Set Device Name of Switch
Step 1 Click System Management > System Configuration, to bounce a webpage as shown in Fig.3-5
Step 2 Enter the device name of switch into Device Name field.
Step 3 Click Apply button to apply all the changes made.
----End

3.6 SNTP

In network, it is very important to configure time synchronization of entire network,
particularly the causality of event can be detected based on the time of log entry. SNTP
(simple network time protocol) is mainly applied to synchronizing clocks of computers in the
network.
Click System Management > SNTP, to configure the system time, the configuration page is
shown as follows.
Figure 3-6 SNTP Configuration
Table 3-6 Parameters of SNTP Configuration
Item
SNTP Global
SNTP
Configuration
Time Zone
System Current Time
Issue 05 (2012-10-25)
Description
Choose to enable/disable the SNTP function.
Server Server List: Enter the IP addresses of the primary and
secondary SNTP server from which the switch will obtain the
time settings.
Query Interval: This is the interval between requests for
updated SNTP information. (Range: 30-99999; Default: 720
seconds)
Set your local time zone.
Display current time of switch.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 System Management
S1700 Managed Series Ethernet Switches
16