Dynamic Arp; Ipv6 Neighbor; Static Neighbor - Huawei S1700 Series Web User Manual

S1700 Managed Series Ethernet Switches
Web User Manual

3.8.2 Dynamic ARP

Click System Management > ARP > Dynamic ARP page to display the switch detected
dynamic ARP entries and set the aging time for ARP cache entries, the configuration page is
shown as the figure below.
Figure 3-13 Dynamic ARP
Table 3-12 Parameters of Dynamic ARP
Item
Aging Time
Interface Name
IP Address
MAC Address
Dynamic ARP Aging Time Configuration
Step 1 Click System Management > ARP> Dynamic ARP.
Step 2 Set aging time in Aging Time field for ARP.
Step 3 Click Apply to apply all the changes made.
----End

3.9 IPv6 Neighbor

3.9.1 Static Neighbor

Click System Management > IPv6 Neighbor > Static Neighbor page to display and add IPv6
static neighborhood information, the configuration page is shown as the figure below.
Issue 05 (2012-10-25)
Description
Set the aging time for dynamic entries in the ARP table.
(Range: 0-65535 minutes; Default: 20 minutes) The ARP
aging timeout can only be set globally for all VLANs.
Name of the interface.
Dynamically detected IP address.
Dynamically detected MAC address.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 System Management
S1700 Managed Series Ethernet Switches
22