S1700 Managed Series Ethernet Switches
Web User Manual
Step 3 Click the check box on the left side of the configuring Dot3 TLVs parameter interface, and
then click Configure to open the following page.
Figure 10-33 Configure Dot3 TLVs parameter
Step 4 Enable to publish the relevant parameter.
Step 5 Click Apply button to apply all the changes made.
----End
10.3.7 System Statistics
Click Network > LLDP > System Statistics to display LLDP information receiving and
sending from local interface, the configuration page is displayed as follows.
Figure 10-34 System Statistic
Table 10-19 Parameters of System Statistic
Item
Query
Interface Name
Total Transmission Frame
Total Discard of Received
Frame
Receive Error Frame
Issue 05 (2012-10-25)
Description
Search the system statistics of specified interface in
Interface Name.
Interface number
Total number of transmitted LLDP PDU frame.
The number of LLDP PDU frame that has been received
but dropped due to property loss or insufficient memory or
other reasons.
The received LLDP PDU frames contain one or more
unknown error.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Network
200