Interface Parameter Settings - Huawei S1700 Series Web User Manual

S1700 Managed Series Ethernet Switches
Web User Manual
Configure DHCP Snooping Trust Status for Interface
Step 1 Click Security> DHCP Snooping.
Step 2 Click Interface Trust Settings in Tab.
Step 3 Click the checkbox on the left side of DHCP Snooping trust interface to be configured, and
then click Configure button, the configuration page is displayed as follows.
Figure 9-37 Configure Interface Trust Settings
Step 4 Select Trust Interface from Status field to configure switch trust DHCP Server message from
the interface.
Step 5 Click Apply button to apply the changes made.
----End
Interface with IPSG enabled can not be set to DHCP Snooping trusted.

9.8.4 Interface Parameter Settings

Click Security> DHCP Snooping> Interface Parameter Settings, the configuration page is
displayed as follows.
Figure 9-38 Interface Parameter Settings
Issue 05 (2012-10-25)
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Security
151