Voice Vlan Oui - Huawei S1700 Series Web User Manual

S1700 Managed Series Ethernet Switches
Web User Manual
Step 2 Choose the interface number to be configured from the interface list, and then click Configure
button to open the page as shown in following figure.
Figure 5-11 Configure Voice VLAN Interface
Step 3 Set Voice VLAN parameters for interface
Step 4 Click Apply button to apply all the changes made.
----End

5.3.3 Voice VLAN OUI

VoIP device connected to the switch can be identified by Organizational Unique Identifier
(OUI) of manufacturer in the source MAC address of received packets. OUI numbers are
assigned to manufacturers and form the first three octets of device MAC addresses. The MAC
OUI numbers for VoIP equipment can be configured on the switch so that traffic from these
devices is recognized as VoIP.
Click Service Management > Voice VLAN > Voice VLAN OUI page to set Voice VLAN
OUT for switch.
Figure 5-12 Voice VLAN OUI
Issue 05 (2012-10-25)
NOTE
When Eth-Trunk is used, the Voice VLAN attribute of Eth-Trun interface will follow the principles
below:
1） If Eth-Trunk is created, the Voice VLAN attribute of Eth-Trunk interface is set as default value;
2） If added to Eth-Trunk, the interface will be not displayed in Voice VLAN interface list;
3） If removed from Eth-Trunk,the Voice VLAN attribute of original interface will recover.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Service Management
46