Huawei S1700 Series Web User Manual page 37

S1700 Managed Series Ethernet Switches
Web User Manual
Item
Flow
Configuration
Flow Control Status
Link Status
Speed Set
Duplex Set
Negotiation
Input Rate Limit
Output Rate Limit
Jumbo Frame
Description
Interface Attribute Configuration
Step 1 Click Interface Management > Ethernet Interface > Basic Attributes.
Step 2 Choose the check box in the left-hand column of the interface to be configured with attributes
from the list, and then click Configure button to manually configure status for the designated
interface, including negotiation, interface speed, duplex mode and flow control, the
configuration page is shown as the figure below.
Figure 4-2 Basic Attributes Configuration
Issue 05 (2012-10-25)
Description
Control Check if the flow control is enabled or disabled on the
interface.
Check whether the flow control is effective or not.
Display the operating speed and duplex mode of the interface.
Display the current speed configuration on the interface.
Display the current duplex configuration on the interface.
Display if the automatic negotiation is enabled or disabled.
Input rate limit on interface.
Output rate limit on interface.
Size of Jumbo frame on interface.
Description about the interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Interface Management
27