Group Deny - Huawei S1700 Series Web User Manual

S1700 Managed Series Ethernet Switches
Web User Manual
Item
Last Member Query Interval
Robustness Variable
Query Interval
Step 3 Adjust the needed IGMP settings.
Step 4 Click Apply button to apply all the changes made.
----End

5.6.3 Group Deny

Click Service Management>IGMP Snooping> Group Deny to view interface‟s IGMP
Snooping learning status; shown as the figure below.
Figure 5-37 Group Deny
Table 5-24 Parameters of Group Deny
Item
VLAN
Interface Name
Group Deny
Create IGMP Snooping Group Deny
Step 1 Click Service Management>IGMP Snooping> Group Deny.
Step 2 Click New button to open the configuration page shown as the figure below.
Issue 05 (2012-10-25)
Description
Represents the time interval when IGMP receiving the
IGMP leave group message sent by the host, and
sending IGMP specific group query message. The unit
is second.
This value is adjusted by the expected packet loss ratio.
This value should be corresponding increased to adapt
to the increasing packet loss if packet loss is high on
LAN. The value range is 2~5; the default is 2.
This value is used to set the time interval for
transmitting IGMP query. The range is 1~31744
second(s); the default is 125 seconds.
Description
VLAN ID number.
Interface number in this VLAN.
Learning status of interface
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Service Management
73